Table of Contents
Advertisement
7
Wall mount
Before you mount your SoundBar on the wall,
read all the safety precautions (see 'Important' on
page 4).
Make sure that you use the screws andbrackets
specified by the manufacturer or sold with the
apparatus. Secure the wall mount to a wall that
can support the combined weight of the product
and the wall mount. For information about the size
of the keyhole on your SoundBar's mount, see the
Quick Start Guide.
> 0.98"
Note
•
Koninklijke Philips Electronics N.V. bears no
responsibility for improper wall mounting that
results in accident, injury or damage. If you have
any query, contact Philips Consumer Care in
your country.
EN
12
0.12 - 0.14"
8
Product
specifications
Note
•
Specifications and design are subject to change
without notice.
Amplifier
•
Total output power: 60W RMS (30% THD)
•
Frequency response: 20 Hz-20 kHz / ±3 dB
•
Signal-to-noise ratio: > 65 dB (CCIR) /
(A-weighted)
•
Input sensitivity:
•
AUX: 600 mV
•
Music iLink: 250 mV
Audio
•
S/PDIF Digital audio input:
•
Coaxial: IEC 60958-3
•
Optical: TOSLINK
Main unit
•
Power supply: 110-240 V~, 50-60 Hz
•
Power consumption: 20 W
•
Standby power consumption: ≤ 0.5 W
•
Speaker impedance: 4 ohm woofer, 4 ohm
tweeter
•
Speaker drivers: 25 x 120 mm (1 x 5")
woofer, 38 mm (1.5") tweeter
•
Frequency response: 150 Hz-20 kHz
•
Dimensions (WxHxD): 708 x 47 x 65 mm
•
Weight: 1.03 kg
Subwoofer
•
Impedance: 8 ohm
•
Speaker drivers: 130 mm (5.25") woofer
•
Frequency response: 20 Hz-150 Hz
•
Dimensions (WxHxD): 165 x 240 x 295 mm
•
Weight: 2.6 kg
•
Cable length: 3 m
Remote control batteries
•
1 x CR2025
Hide quick links:
Advertisement
Table of Contents
