Canon imageRUNNER C3220 Copying Manual page 219

NOTE
If the desired setting is not displayed, press [M] or [L] to scroll to the desired
setting.
2
Select the desired margin type © enter the margin width.
IMPORTANT
•
If you are using the Margin and Two-sided modes together and copying an original
that already has a left or right margin, follow the instructions below:
- 1 2-Sided: Set the Margin mode for the back only.
- 2 2-Sided: You do not need to set the Margin mode. Proceed to make copies
in the usual way.
- 2 1-Sided: Set the Margin mode for the back only.
•
If you are using the Margin and Two-sided modes together and copying an original
that does not have a margin, follow the instructions below:
- 1 2-Sided: Set the Margin mode for both the front and back.
- 2 2-Sided: Set the Margin mode for both the front and back.
- 2 1-Sided: Set the Margin mode for both the front and back.
NOTE
•
To enter values in millimeters, press [mm].
•
The default setting is '3/8" (10 mm)'.
Margin Mode 4-9
4