Firmware Update to V3.31 (EPROM Exchange)
HöSP-Abzweigschutz
EHV Line Protection
SIEMENS
7SA513...
Firmware version V3.31 for the line protection relay 7SA513 is available now.
• Affected are only devices with a DVH-module (see fig. 1), which are manufactured in the
release 5 or higher. Release 5 is already present in all devices with the hardware
version /CD or higher. For devices up to hardware version /CC, the DVH-release (≥ 5) is decisive
and has to be identified (compare to No. 8 of this service-information)!
(Object number of the DVH-module: C73207-A272-A5-*with* ≥ 5).
Attention! Devices with a DVH-module of an older release (≤ 4), a firmware-upgrade is only
possible by replacing the complete DVH-module! (Order procedure absolutely with declaration of
the MLFB-No. of the device incl. hardware version ( ... /* * ), Fab.-No. and required firmware
version).
• Notice for devices 7SA513*-*****-*C** with serial interface to a central data processing station
(e.g. LSA):
The normal signal position for the data transmission is factory preset as „light off". A change of the
normal signal position to „light on" by a jumper plug is only possible on DVH-modules with the
release 6 (or higher), and is already present in all devices with hardware version /DD and higher.
1H firmware
26.06.01
1G firmware
11.04.01
1D firmware
22.04.99
1C firmware
07.01.99
1B
firmware
07.01.99
1A
first issue
06.01.99
Iss.
Type of notice
Date
SIEMENS AG
Alle Rechte vorbehalten
ë
Service-Information 7SA513 /BB.../EE
Betrieb/Service
1
Störung/Blocked
2
3
4
5
6
7
8
22.04.1999
Date
Röse
Name
ZC
Claus
Tested
ZC
Stand.
Rö
(readme_EPROM_BB_EE.doc)
S I E M E N S A G
Rö
P T D P A D S I
Rö
Rö
Power Transmission
and Distribution
Name
Proprietary data, confidential
ë
9
17
10
18
11
19
12
20
13
21
14
22
15
23
16
24
Service-Information
7SA513 /BB.../EE V1/V2/V3.XX --> V3.31
Firmware update via EPROM exchange
C53000-A1000-X015-1H-7620
All rights reserved
ë
+5V
+15V
-15V
+24V
Page
1 / 13