Figure 2-1 1 Data Scope Capture Data Display
The data can be captured and saved for later review. The default file name for input data is
/tmp/emux.in and the default file name for output data is /tmp/emux.out. If desired, the data
scope can be configured to run continuously. You can specify if you want to view the received
data, send data or both.
Termio
The Termino sub-menu allows you to view general terminal interface data associated with the
port.
Termio displays all enabled termio flags and is thus similar to the stty command.To view the
interface data associated with the port, select Termio and press Enter.
Figure 2-12
shows the terminal interface details.
Figure 2-12 Termio Flags Display
Register Dump
The Register Dump sub-menu displays a real-time window of the on-board memory. To view
the same, select Register Dump and press Enter.
Press "S" to save the window content to a file.
22
Troubleshooting