Advertisement
10
SWING FUNCTION
Press the "Swing" button to make the fan oscillate at a range of 50
degrees, and then press it again to stop the oscillation.
MODE SELECTION
Press the "Mode" button to select normal mode, nature mode or
sleep mode, and the LED indicator will light up accordingly: Nature
mode (
), sleep mode (
).
Nature mode: The fan is automatically set to match the air conditioner, and
will occasionally change speeds, mimicking a natural breeze.
Sleep mode: The fan speed changes at regular intervals to provide a
comfortable sleeping environment. In sleep mode, the high, medium, and low
speeds will all be cycled through.
Note: In nature mode, the fan speed button is not available, so the speed
indicator will not light up on the top control panel.
FAN SPEED SELECTION
After the power is turned on, the fan will begin in normal mode.
You can press the "Speed" button to change the fan speed to high,
medium, low, and silent. The LED indicator will light up accordingly:
High → Medium → Low → Quiet
Note: If you select the low speed, the motor will start at medium speed for a
few seconds and then switch to low speed.
When the fan is turned on in standby state, all functions except timer and
sleep mode have memory settings.
Hide quick links:
Advertisement
