Advertisement
9
CONTROL PANEL USE
When the unit is first turned on with the On/Off button, it will beep twice, the
air outlet will rotate from the current angle to 0°, and the system enters the
standby state. If there is no button operation within 1 minute, the indicator
light will darken. If the button is pressed again, the indicator light will turn back
to full brightness.
The unit can be operated by pressing the button on the control panel. The
instructions are as follows:
ON/OFF CONTROL
Press the "On/Off" button for the first time to enter the normal fan
speed—this will cause the air outlet to automatically rotate out
toward the front. Press the "On/Off" button again to shut down—
this will cause the fan to stop running and hide the air outlet. At this point, the
fan is in standby mode. To completely turn off the fan, press the On/Off button.
Note: In order to extend the life of the product, it is recommended to
completely power off the product after each use
TIMER
Press the "Timer" button to select 1 hour, 2 hours, 4 hours or 8
hours. If the LED is off, it means that the timer function is not set.
After selecting the time, the LED indicator will display the set time
and will automatically shut down after the selected time has elapsed.
COOLER/HUMIDIFIER
Press the "Cooler/Humidifier" button to enable the water pump. If the water
pump is running, water will flow down through the cooling pad and offer cooler
air than the fan-only setting.
Hide quick links:
Advertisement
