Table of Contents
Advertisement
your telephone sets and other telecommunication devices. The
second method requires a splitter and is explained in Chapter
4. If it is determined that a splitter is required, it will be
installed by your DSL service provider.
Whether microfilters or a splitter is installed, a DSL modem
allows telephone conversation and data downloads
simultaneously over the existing telephone line. The
microfilters and splitter are completely passive. The telephone
service will work, even in instances of power outage. The DSL
modem encodes the data sent from the PC and sends it to a
corresponding DSL modem located at the local service
provider's office.
1.2 Unpacking Instructions
Before unpacking, make a preliminary inspection of the
shipping box. Any evidence of damage should be noted and
reported immediately to a customer support center.
Note: The customer support information can be found in the product
information packet provided by your DSL service provider. Keep the
shipping boxes and packing material for return.
It is recommended that you unpack the equipment on a clean,
flat surface.
1. Place the shipping box upright. Cut the sealing tape
and then open the flaps.
2. Take out the items in the box. Inspect the product for
damage and verify that all parts are included.
3. Report any damage or missing parts to the customer
support center.
2
Advertisement
Table of Contents
