Listen To Fm Radio; Program Radio Stations Automatically; Program Radio Stations Manually; Tune To A Programmed Radio Station - Philips DCD7010/12 User Manual

7 Listen to FM
radio
Note
•
A maximum of 20 radio stations can be stored.
•
Fully extend the FM antenna for better
reception.
Program radio stations
automatically
1
Press RADIO.
2
Press and hold PROGRAM for 2 seconds.
»
A U T O
appears.
»
Available stations are stored
automatically.
»
The first programmed radio station is
broadcast automatically.
Program radio stations
manually
1
Press RADIO.
2
Long press / to search to a radio
station, or press /
tune to a radio station.
3
Press PROGRAM to program the current
station .
»
The sequence number blinks with the
current frequency displayed.
4
Press / to allocate a sequence
number from 01 to 20 to this radio
station.
5
Press PROGRAM to confirm.
»
The sequence number and the current
frequency are displayed.
6
Repeat steps 2-5 to program more
stations.
•
•
•
Tune to a programmed radio
station
1
2

Show RDS information

RDS (Radio Data System) is a service
that allows FM stations to show additional
information. If you tune to an RDS station, an
RDS icon and the station name are displayed.
1
2
to manually
Synchronize clock with RDS station
You can synchronize the clock time on the
unit with an RDS station.
1
2
•
Tip
To overwrite a programmed station, store
another station with its sequence number.
[STEREO] is default setting for tuner mode.
Under tuner mode, you can press
to toggle between [STEREO] and [MONO], and
the unit memorizes your setting even if you turn
off the unit or turn to other sources.
Press RADIO.
Press / repeatedly to select a
programmed radio station.
Tune to an RDS station.
Press RDS/INFO repeatedly to scroll
through the following information (if
available):
»
Station name
»
Program type such as [NEWS] (news),
[SPORT] (sport), [POP M] (pop music)...
»
Frequency
Tune to an RDS radio station that
transmits time signals.
Press RDS/INFO for over 2 seconds.
» [CT SYNC] is displayed and the unit
reads RDS time automatically.
»
If no time signal is received,
is displayed.
Note
The accuracy of the transmitted time depends
on the RDS station that transmits the time signal.
OK repeatedly
[NO CT]
EN 19