Engaging The Rotor Blades; Disengaging The Rotor Blades; Shutting Off The Engine; Adjusting The Discharge Chute And Chute Deflector - Toro Power Clear 721 Operator's Manual

Engaging the Rotor Blades

To engage the rotor blades, hold the control bar
against the handle (Figure
Figure 16
Disengaging the Rotor
Blades
To disengage the rotor blades, release the control bar
(Figure 17).
Figure 17
16).

Shutting Off the Engine

To shut off the engine, remove the key from the
ignition.
Adjusting the Discharge
Chute and Chute Deflector
Models 38752 and 38753
To raise or lower the angle of the chute deflector,
press the trigger on the chute deflector and move the
chute deflector up or down.
To adjust the discharge chute, move the chute handle.
g216251
1. Chute handle
Adjusting the Discharge
Chute and Chute Deflector
Model 38756
g006457
To adjust the discharge chute, press the trigger of the
Quick Shoot™ control on the right side of the handle
and move it up or down along the handle. Moving the
control down the handle rotates the discharge chute
to the left; moving the control up the handle rotates
the discharge chute to the right
13
Figure 18
2. Trigger
(Figure 19).
g278630