Silvercrest SWV 733 B1 Quick Start Manual

SilverCrest Dual-Band WLAN Range Extender "SWV 733 B1"

Quick Start Guide

Please ensure you read and observe the accompanying operating instructions and safety information. Keep this Quick Start Guide in a safe place. Hand over all
documents in the event that you pass on the Dual-Band WiFi Range Extender to a third party. This Quick Start Guide is part of the product.
Selecting operating mode and initial use
Select "Access Point" or "Repeater" operating mode.
Installation hotline with free support
Should you need any support during initial use of your Dual-Band WiFi Range Extender, we will be more than happy to help via our contact numbers
0871 5000 720 (GB), 1890 930 034 (IE), 800 62230 (MT), 8009 4409 (CY).
Option1: WPS - The easiest type of configuration (only for "Repeater" operating mode)
Option2: Manual configuration
Option3: APP configuration
Option1: WPS - The easiest type of configuration (only for "Repeater" operating mode)
Use this option if your router supports WPS.
Press the WPS button for at least 6 seconds. After you have
released the WPS button, the WPS LED flashes rapidly for
approx. 2 minutes.
You can now use the Dual-Band WiFi Range Extender where the wireless signal is to be extended. The optimum location for the Dual-Band WiFi Range Extender is
exactly in the middle between your WiFi router and wireless devices, which are to be connected to the wireless network via the Dual-Band WiFi Range Extender. Wait
until the Field strength indicator shows the signal strength. If the signal strength is weak, the Dual-Band WiFi Range Extender must be placed closer to the WiFi router.
The Dual-Band WiFi Range Extender can be accessed under the SSID (Wireless name) and the network key of your WiFi router. Your network key can usually be
found on your router, provided it has not been changed by you.
TARGA GmbH, Coesterweg 45, DE-59494 Soest, GERMANY
The Dual-Band WiFi Range Extender should be placed near (approx. 2 to 3
metres) the WiFi router the first time it is used. Wait approx. 3 minutes!
(Symbolic representation, connection button (WPS) can be differently arranged and designated depending on the router
model)
Within these 2 minutes, press the connection button (WPS) on your WiFi router. To do so, refer to the
documentation that came with your WiFi router. Once the connection has been successfully
established, the Field strength indicator displays the signal strength on the Dual-Band WiFi Range
Extender.
It may take up to 3 minutes to establish the connection!
IAN: 300187
English
V 1.6