Advertisement
Depending on your broadband connection
(ADSL, VDSL or Fibre) follow the steps below:
1. For ADSL or VDSL Connections
1. Connect the
microfilter to the
phone jack on
your wall.
2. Connect the phone
cable from the
microfilter to the
DSL Port of your
modem router
OR
For Fibre Connections
Connect the yellow
ethernet cable from the
red WAN Port of your
modem router to either
the LAN1 or GE1 Port of
your ONT. Your ONT will
be located on your wall.
(See below for details)
Your Optical Network Terminal (ONT)
This is the under side of your ONT, which will be located on
your wall if you have a fibre network connection.
POTS1
POTS2
TEL
This connects to
your modem.
2
GE1 This connects to your modem
RESET
GE1
GE3
OR
LAN1
LAN2
LAN3
LAN4
Microfilter
1
Phone Cable
DSL Port
WAN Port
GE3
GE4
POWER RESET WLAN WPS
Make sure this button is pushed
in so that the POWER light at the
front of the ONT shows green.
POWER
LED ON/OFF
Advertisement
