Hitachi WH 12DM2 Handling Instructions Manual
  1. Manuals
  2. Brands
  3. Hitachi Manuals
  4. Impact Driver
  5. WH 12DM2
  6. Handling instructions manual

Hitachi WH 12DM2 Handling Instructions Manual

Cordless impact driver/wrench
Hide thumbs Also See for WH 12DM2:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Operation Manual & Safety Instructions, Handling Instructions Manual
Cordless Impact Driver/Wrench
Akku-Schlagschrauber
Perceuse/visseuse à percussion sur batterie
Avvitatore a impulso a batteria per viti e bulloni
Snoerloze slagschroevendraaier/sleutel
Atornillador/Llave de impacto a batería
Aparafusadora/ Chave de impacto a bateria
∆ραπανοκατσάβιδο Μπαταρίας/Κλειδί
Variable speed
WH 12DM2 • WR 12DM2
WH 9DM2 • WR 9DM2
WH12DM2
WR12DM2
Read through carefully and understand these instructions before use.
Diese Anleitung vor Benutzung des Werkzeugs sorgfältig durchlesen und verstehen.
Lire soigneusement et bien assimiler ces instructions avant usage.
Prima dell'uso leggere attentamente e comprendere queste istruzioni.
Deze gebruiksaanwijzing s.v.p. voor gebruik zorgvuldig doorlezen.
Leer cuidadosamente y comprender estas instrucciones antes del uso.
Antes de usar, leia com cuidado para assimilar estas instruções.
∆ιαβάστε προσεκτικά και κατανοήσετε αυτές τις οδηγίες πριν τη χρήση.
Handling instructions
Bedienungsanleitung
Mode d'emploi
Istruzioni per l'uso
Gebruiksaanwijzing
Instrucciones de manejo
Instruções de uso
Οδηγίες χειρισµού

Advertisement

Table of Contents
loading

Related Manuals for Hitachi WH 12DM2

Summary of Contents for Hitachi WH 12DM2

  • Page 1 Snoerloze slagschroevendraaier/sleutel Atornillador/Llave de impacto a batería Aparafusadora/ Chave de impacto a bateria ∆ραπανοκατσάβιδο Μπαταρίας/Κλειδί Variable speed WH 12DM2 • WR 12DM2 WH 9DM2 • WR 9DM2 WH12DM2 WR12DM2 Read through carefully and understand these instructions before use. Diese Anleitung vor Benutzung des Werkzeugs sorgfältig durchlesen und verstehen.
  • Page 2 (UC14YFA) (UC14YF2)
  • Page 4 11.5mm...
  • Page 5 English Deutsch Français Italiano 12 V Rechargeable Batteria ricaricabile, Akkumulator, 12 V Batterie rechargeable, battery (For WH12DM2, (Für WH12DM2, 12 V (Pour WH12DM2, 12 V (Per WH12DM2, WR12DM2) WR12DM2) WR12DM2) WR12DM2) 9.6 V Rechargeable Akkumulator, 9,6 V Batterie rechargeable, Batteria ricaricabile, battery (For WH9DM2, (Für WH9DM2, 9,6 V (Pour WH9DM2,...

  • Page 6: General Operational Precautions

    Do not allow foreign matter to enter the hole for charger. connecting the rechargeable battery. 17. Use only genuine HITACHI replacement parts. 10. Never disassemble the rechargeable battery and 18. Do not use power tools for applications other than charger.

  • Page 7: Specifications

    English If the socket turns without being connected to a PRECAUTIONS FOR CORDLESS IMPACT load, the universal joint causes the socket to turn WRENCH wildly. You could get hurt or the movement of the socket This is a portable tool for tightening and loosening could shake the impact wrench so much as to bolts and nuts.

  • Page 8: Standard Accessories

    English Cordless Impact Wrench Model WR9DM2 WR12DM2 (9.6 V) (12 V) –1 No-load speed 0 – 2600 min Capacity M6 – M14 (Ordinary bolt) M6 – M16 (Ordinary bolt) M6 – M10 (High tension bolt) M6 – M12 (High tension bolt) Maximum 120 N·m Maximum 165 N·m Tightening torque...
  • Page 9 English <For WR12DM2, WR9DM2> 1. Sockets Form B Form C Form D <For WR12DM2> Table 1 Square Suitable Bolt Diameter Main Socket Hexagonal head drive Dimensions (mm) Part Name width across Form Code No. High Inch dimensions flats H (mm) S (mm) tension (ordinary) (small) bolts...
  • Page 10 English <For WR12DM2> Table 3 Square Suitable Bolt Diameter Main Socket Hexagonal head drive Dimensions (mm) Part Name width across Form Code No. High Inch dimensions flats H (mm) S (mm) tension (ordinary) (small) bolts øF 12 mm 955138 W5/16" 13 mm 955139 21.5...

  • Page 11: Battery Removal/Installation

    English 7. Bit adaptor: Code No. 322752 (WR12DM2) BATTERY REMOVAL/INSTALLATION This is used for tightening small screws (M6 – M8). NOTE: 1. Battery removal (1) This adaptor is set only on the anvil (drive angle) of Hold the handle tightly and push the battery latch to the main unit.

  • Page 12: Prior To Operation

    English (2) Regarding the temperatures of the rechargeable used, the pilot lamp of the charger lights up green. In battery such a case, first let the battery cool, then start The temperatures for rechargeable batteries are as charging. shown in the table below, and batteries that have When the pilot lamp flikers in red quickly (at 0.2- become hot should be cooled for a while before second intervals), check for and take out any foreign...

  • Page 13: How To Use

    (+) and minus (–) terminals Please use the designated attachments which are correctly. (Fig. 17) listed in the operations manual and Hitachi’s catalog. (c) Align the indentation in the hook main body with Accidents or injuries could result from not doing so.

  • Page 14: Operational Cautions

    English 5. Number of screws tightenings possible (WH12DM2, 3. Tightening torque WH9DM2) Refer to Fig. 23, 24, 25 and Fig. 26 for the tightening Please refer to the table below for the number of torque of bolts (according to size), under the screw tightened possible with one charge.
  • Page 15 English (5) Using optional parts (WR12DM2, WR9DM2) (7) Tightening torque varies, depending on the battery’s The tightening torque is reduced a little when an charge level. (WR12DM2, WR9DM2) extension bar, universal joint or a long socket is Fig. 28 and 29 show examples of the relationship used.
  • Page 16 English For WR12DM2 kgf·cm N·m kgf·cm N·m kgf·cm N·m M12 × 45 M14 × 50 M10 × 30 2000 2000 2000 High tension High tension bolt bolt 1500 1500 1500 High tension bolt 1000 1000 1000 Ordinary bolt Ordinary bolt Ordinary bolt Tightening time: sec Tightening time: sec...

  • Page 17: Maintenance And Inspection

    Replace it. When replacing the carbon brush with a new one, be 2. Inspecting the socket (WR12DM2, WR9DM2) sure to use the Hitachi Carbon Brush Code No. 999054. A worn or deformed hex or a square-holed socket 6. Replacing carbon brushes...
  • Page 18 CAUTION: 108 dB (A)(WH12DM2) Repair, modification and inspection of Hitachi Power 108 dB (A)(WH9DM2) Tools must be carried out by an Hitachi Authorized 109 dB (A)(WR12DM2) Service Center. 109 dB (A)(WR9DM2) This Parts List will be helpful if presented with the Wear ear protection.

This manual is also suitable for:

Wh 9dm2Wr 9dm2Wr 12dm2

Table of Contents