Installing The Pe Cable - Huawei ACBox Series User Manual

ACBox 12-In 1-Out AC Combiner Box
User Manual
Figure 5-4 Removing a cover
----End

5.5 Installing the PE Cable

Prerequisites
The PE cable and OT-M6 terminal are available.
Procedure
Step 1 Crimp an OT terminal on the PE cable.
Step 2 (Optional) Knock off the barrier chip from a cable hole at the bottom of the ACBox. For
details, see


Step 3 Secure the PE cable.
Issue 03 (2018-05-15)
5.3 Knocking Off Barrier Chips from Cable
Before connecting the PE cable for the first time, knock off the barrier chip from the cable
hole for the AC output power cable using a rubber mallet.
Connect the PE cable to the nearest ground bar. Recommended: Route the PE cable
through the cable hole for the AC output power cable before connecting it.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Electrical Connections
Holes.
28