Huawei ACBox Series User Manual page 36

ACBox 12-In 1-Out AC Combiner Box
User Manual

The lengths of the jackets and insulation layers that need to be removed from the AC input
power cables to input circuit breakers QF01 to QF06 are different. When connecting a
stripped cable, ensure that the exposed insulation layer is all in the enclosure, and the
jacket is all outside the enclosure.

For the lengths of the jackets and insulation layers that need to be removed from the AC
input power cables to input circuit breakers QF07 to QF12, refer to the AC input power
cables to input circuit breakers QF01 to QF06.
Figure 5-6 Stripping an AC input power cable
(1) Core wire
Step 2 Crimp an OT terminal.
Step 3 Route the cables through the cable holes 1 and 2 for the AC input power cable.
Step 4 Connect the AC input power cable to the U, O, and W terminals on the circuit breaker, and
tighten the bolts using a torque screwdriver.
Figure 5-7
input circuit breakers QF01 to QF05 and QF07 to QF12 are connected in the same way.
To avoid device damage, do not mix up the U, O, and W terminals when connecting cables.
Issue 03 (2018-05-15)
(2) Insulation layer
shows how to connect the AC input power cable to input circuit breaker QF06. The cables to
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Electrical Connections
(3) Jacket
30