Installation of the appliance
You can place the appliance a smooth surface by means of the suction plate
The surface should be dry, clean and dust-free. Select a location where,
should the securing loosen itself, the appliance will not fall into water and
also where it will not be seriously damaged by the fall.
• Lightly moisten the suction cup
surface. To release the suction plate, pull on the small loop
Reception mode
• To switch the appliance on, turn the upper part
resting position. With this you can also regulate the sound volume.
To switch the appliance off, turn it anti-clockwise until it perceptibly engages.
• To search for a radio station automatically, press the rocker switch
the direction "SCAN". The transmission range is searched in only one
direction — should a station not be found, press the rocker switch
direction "RESET". The search then starts from the beginning.
Maintenance
• Never open any of the coverings on the appliance. Arrange for the device
to be repaired by specialists only. The appliance is maintenance-free.
In the event of malfunction or apparent damage, make contact with our
Customer Services.
and then press it firmly onto a smooth
- 5 -
.
clockwise from the
in the
.
in