18in and 21in 11-blade and 14-blade edge cutting units (20 pages)
Summary of Contents for Toro 138-2998
Page 1
Form No. 3423-154 Rev A Power Harness Kit Groundsmaster ® 3280-D 4-Wheel Drive Traction Unit Model No. 138-2998 Installation Instructions Installation Accessing the Machine Preparing the Machine No Parts Required Opening the Hood No Parts Required Procedure Park the machine on a level surface.
Page 2
Removing the Battery Cables No Parts Required Procedure WARNING Battery terminals or metal tools could short against metal components, causing sparks. g253131 • When removing or installing the battery, Figure 2 do not allow the battery terminals to touch 1. Negative battery cable 2.
Page 3
Connecting the Washer Bottle Connect the plug into the washer bottle (Figure Routing the Wire Harness No Parts Required Installing the Wire Harness Important: Whenever working with the electrical system, always disconnect the battery cables, black (-) cable first, to prevent possible wiring damage from short-outs.
Page 4
g032519 Figure 5 1. Positive-post clamp 4. Ring connector 2. Negative-post clamp 5. Bolt 3. Nut Remove the nuts from the post bolts (Figure Install the positive-terminal connector (red wire) over the positive-post bolt and loosely install the (Figure Install the negative-terminal connector (black wire) over the negative-post bolt and loosely install the nut (Figure...