Panasonic KX-TDA15 Installation Manual page 49

Mounting on Concrete or Mortar Wall
CAUTION
Drive mounting screws into the wall. Be careful to avoid touching any metal laths, wire
laths or metal plates in the wall.
1.
Place the reference for wall mounting (on the following page) on the wall to mark the 2
screw positions.
2.
Install two anchor plugs (user-supplied) in the wall.
Hammer
3.
Install the screws (included) in the wall.
Drive the screw
to this position.
4.
Hook the AC adaptor on the screw heads.
Note
Be careful not to drop the AC adaptor.
110 mm
Anchor Plug
6.4 mm
29 mm
2.2 Installation of the Hybrid IP-PBX
Installation Manual 49