Panasonic KX-TDA15 Installation Manual page 93

3.
After setting the DIP switch, connect an AC adaptor or battery box to the CS using a power
supply adaptor.
Note for users in the United Kingdom
240 V AC must not be used on a building site. Instead of an AC adaptor, connect a
battery box to the CS.
Telephone Cord
Modular
To AC Adaptor (KX-A11/KX-TCA1)/
Battery Box (PSZZTD142CE)
4.
Install the CS temporarily for the site survey. Install the CS at least 2 m above the floor,
keeping the antennas in the upright position.
Power Supply Adaptor
(PSZZ1TDA0142)
2.7 Connection of DECT Portable Stations
Installation Manual 93