Advertisement
Cal.
AS01A
1. How to remove the setting stem
When removing the setting stem, put the setting stem at normal position and push the ''setting lever''
by tweezers. (Refer to the Fig.[0].)
The ''setting lever'' can not be push if the setting stem is not at normal position.
2. Attention for solar cell unit
Pay attention not to touch and scratch the surface of the solar cell.
3. Dial transparency rate
Keep the transparency rate of the dial more than 30%.
(Effective aperture is φ19mm)
Each elements of solar cell must be kept the transparency rate.
4. The guideline of charging time is as in below
Illumination
(Lx)
700
3,000
10,000
100,000
5. Caution
When charging the watch, do not place it too close to fluorescent lamp or other light sources as the
watch temperature will become extremely high, causing damage to the parts inside the watch.
Attention-01
Fig.[0]
Source of light
Inside the office
A fluorescent lamp
Sun light
A
Environment
(Approx.
Hours)
−
30W 20cm
60
Cloudy
20
Fine weather
5
Condition A : Time required for full charge
Condition B : Time required for steady operation
Condition C : Time to charge 1 day of power
24/Apr./'15
Date :
Rev. : 01
(Dial transparency rate = 30%)
B
(Approx.
(Approx.
Hours)
Minutes)
35
4
1.5
15 minutes
C
100
25
8
2
P. 10-01
Advertisement
