ENGLISH
For the AW-RP120
1
Press the MENU button.
2
Press the [23] number button.
3
Turn the F1 dial to display the [21.REC] menu.
The current status will be indicated (START: Recording in
progress; STOP: Recording stopped).
4
Turn the F2 dial to select [START
then press the F2 dial.
Notes
This function can also be assigned to the USER buttons. For details on configuring the USER buttons, refer to the
operating instructions for the AW-RP120.
You can check the current recording status using the following methods.
• Perform the above steps 1 to 3.
• Check the whether the USER button is lit (when the function is assigned to a USER button).
There will be a slight lag between the recording status indicated on the unit and the actual recording start or stop
time on the device.
For the AK-HRP200
1
Start recording.
Press the <VF POWER> and <STORE>
buttons simultaneously.
Recording starts, and <TALLY/CALL> lights.
2
Stop recording.
Press the <VF POWER> and <SCENE4>
buttons simultaneously.
Recording stops, and <TALLY/CALL> turns
off.
Note
There will be a slight lag between the recording status indicated by the lit status of <TALLY/CALL> and the actual
recording start or stop time on the device.
] / [STOP
], and
2. Stop
recording.
<TALLY/CALL>
E-2
AG-UMR20P/E, AG-UCK20G
AG-MDR25P/E, AG-MDC20G
1
21.REC
2
AUTO
HEAD
VF
POWER
POWER
BARS
WHITE
BLACK
TEST
DTL
KNEE
OFF
OFF
5600K
MATRIX
SKINDTL
SCENE/USER FILE
SCENE 4
SHIFT
SCENE 1
SCENE 2
SCENE 3
USER 1
USER 2
USER 3
GAIN
VR LOCK
DTL
FLARE/PED
UP
CAMERA
ND
CC
SHT
SYNC
M.GAIN
M.PED
10-19
DATA
SET
No.
IRIS
DOWN
DISPLAY SELECT
SELECT
SET UP
ND/CC M.GAIN/M.PED SHUTTER
SHIFT
+
UP+DOWN
SAVE/LOAD
EXIT
EXECUTE
CHARA
IRIS/M.PED LOCK
IRIS
M.PED
PUSH
MENU
PREVIEW
TALLY/CALL
3
4
START
SET UP
1. Start
SHUTTER
ON
recording.
STEP/SYNC
STORE