Connecting, Disconnecting Rush - Philips SA238/00 User Manual

Connecting RUSH to your PC
1
Always turn on your computer before connecting
RUSH.
2
Connect the supplied USB cable to the computer's
USB port. Remove the protective rubber seal from
the USB jack on RUSH and insert the other end of
the cable here.
y RUSH device display: READY
Disconnecting RUSH from your PC
1
Click on the Unplug or Eject Hardware removal icon
tray.
2
Follow the screen instructions.
3
When you reach the message: The 'USB Mass Storage device' can now be
safely removed from the system, click OK before you unplug RUSH from your
PC.
TIP:
– For Windows98 users, there is no
your RUSH shows the READY display, before you unplug RUSH.
– Always replace the protective rubber seal when not connecting RUSH to your
computer.

Connecting, disconnecting RUSH

removal icon. Instead, please check
on your PC task
15