Contents 1 Important Safety Notice Introduction What’s in the box Overview of the main unit 2 Get started Install the car audio Turn on Set date Set clock mode 3 Use map Upgrade the map 4 Play Load discs Connect USB device Insert SD/MMC card Play/Pause Search for a folder...
DivX ® The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Philips is under license. Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
Philips reserves the right to change products at any time without being obliged to adjust earlier supplies accordingly. Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. Introduction With the car entertainment system, you can •...
i GPS antenna j Screen cleaning cloth k Printing material (includes user manual, GPS manual, quick start guide, warranty etc.) Overview of the main unit /SOURCE • Turn the unit on or off. • Select source. b MAP • Open the cover and insert/remove the GPS map card.
These instructions are for a typical installation. However, if your car has different requirements, make the corresponding adjustment. If you have any questions regarding installation kits, consult your Philips car audio dealer. Caution • This unit is designed for negative ground (earth) 12 V DC operation only.
Notes on speaker connection • Never connect speaker wires to the metal body or chassis of the car. • Never connect speaker wires with stripes to one another. Connect wires Caution • Ensure that all loose leads are insulated with electrical tape.
Connect GPS antenna To receive signal from satellites, connect the supplied GPS antenna to your car and the system. Connect the supplied GPS antenna to the system first. Stick the other end of the GPS antenna to a surface for better signal reception. Mount in the dashboard Note •...
Set date Touch the upper left corner to display main menu. Touch in the middle right side of the screen. » The second main menu is displayed. Touch [Settings]. Touch [Time]. » The date setup menu is displayed. Touch on the displayed date information. Touch to set year, month and day.
3 Use map Note • You may need to upgrade the map before using it (see “Upgrade the map” section) Touch the upper left corner to display home menu. Touch [Navigation]. » The navigation menu is displayed in a few seconds. Refer to the map manual (in Chinese) to operate the navigation tool.
4 Play Load discs You can play video, audio or images stored on the following discs: • DVD video, DVD-R, DVD-RW • • Audio CD, CD-R, CD-RW Note • Ensure that the disc contains playable content. Insert the disc into the disc slot with label side facing up.
Remove the SD/MMC card Press SOURCE to switch to another source. Press the card until you hear a click sound. » The card is now disengaged. Remove the SD or MMC card. Play/Pause Once a disc, USB or SD/MMC card is inserted, play starts automatically.
» For video files, touch first, then touch . Touch the numbers to enter chapter/file number, then touch • To clear the previous input, touch • To clear all input, touch Repeat During play, you can select different repeat play modes.
Random play You can play audio tracks/files in random order. During play, touch repeatedly to turn random play on or off. • is highlighted : start random play. • turns gray: cancel random play. Select audio language For video discs that contain two or more audio channels.
Select slide show duration Touch anywhere except for the upper left corner to display menu on the screen, if necessary. Touch repeatedly to select: • Fast: 3 seconds • Normal: 5 seconds • Slow: 8 seconds 5 Play with Bluetooth device You can make or receive phone calls with Bluetooth-enabled phones through the unit.
Disconnect Bluetooth devices To disconnect one device, touch » (green) is displayed. • The device will also be disconnected when the device is moved beyond the operational range. • If you want to reconnect the device to the unit, place it within the operational range. •...
Switch phone call to the mobile If you do not want your passenger to hear your incoming call, you can switch the call to the mobile. During talking, touch » The voice is transferred from the unit’s loudspeaker to the mobile phone. Listen to music from Bluetooth device If the connected Bluetooth device supports...
6 Adjust sound Adjust volume To adjust volume, you can: • Press the VOL +/- button on the steering wheel. • Rotate the volume knob on the host car audio. Mute Touch anywhere except for the upper left corner to display menu on the screen, if necessary Touch »...
7 Adjust settings Display system setup menu Touch the upper left corner to display main menu. Touch in the middle right side of the screen. » The second main menu is displayed. Touch [Settings]. » The settings menu is displayed. •...
Adjust sound settings Touch [Sound]. Touch an option repeatedly to select: Sound Options Description settings [DBB] [On] The Dynamic Bass Boost (DBB) function is on. [Off] The DBB function is off. [DRC] [On] Makes loud sound level softer and soft sound level louder so that you can watch the DVD movies at a low volume, without...
Adjust Bluetooth settings Touch [Bluetooth]. Touch an option repeatedly to select: Bluetooth Options Description settings [Bluetooth] [On] Turn on the Bluetooth function. [Off] Turn off the Bluetooth function. [Auto [On] If the pre-paired connect] device is within the effective range, the unit re-connects to pre-paired device automatically.
Adjust volume settings You can set different volume for different modes. Touch [Volume]. » The volume setting sub-menu is displayed. Touch on a source. • [DVD] • [USB] • [SDHC] • [Bluetooth] • [AV-IN1] • [AV-IN2] • [Navigation] Touch to assign value: 0 to 12. »...
Check the electric connection. Buy a fuse that matches the voltage of the damaged fuse (5A) Replace the fuse. If the fuse gets damaged immediately after it has been replaced, there may be an internal malfunction. In such case, consult your Philips dealer.
9 Product information Note • Product information is subject to change without prior notice. General Power supply 12 V DC (11 V - 16 V), negative ground Fuse Pre-Amp output 2.0 V ( CD play mode; voltage 1 kHz, 0 dB, 10 k Aux-in level 500 mV Dimensions...
If you encounter problems when using this apparatus, check the following points before requesting service. If the problem remains unsolved, go to the Philips web site (www.philips. com/welcome). When you contact Philips, ensure that the apparatus is nearby and the model number and serial number are available.
Preset stations lost. • Battery cable is not correctly connected. Connect the battery cable to the terminal that is always live. Fuse is broken • The Fuse type is incorrect. Replace it with a 5A fuse. • Speaker wire or power wire is grounded. Check the connections.
11 Glossary Bite rate The max data transfer through the USB port. Bluetooth ® Bluetooth is a short-rang wireless protocol that is meant to allow mobile devices to share information and applications without the worry of cables or interface incompatibilities. The name refers to a Viking King who unified Denmark.