Table of Contents
Advertisement
Child lock
1
MENU
Press the
button.
2
Select and confirm the 'FEATURES' line.
3
Select the 'CHILD LOCK' line.
4
Switch the child lock on or off.
5
MENU
Press the
button.
Note: If a button is pressed with the childlock 'on',
'CHILD LOCK' appears for a few seconds in the display.
* Programmed recordings are made despite the child
lock and cannot be interrupted.
Manual channel search
In certain cases the Automatic Channel Search may not be
able to find all of the TV channels (e.g. coded TV channels).
You can then use this manual method to set the channels.
1
Switch on the set with the
h
button and the
simultaneously.
2
Select and confirm the 'MANUAL STORE' line.
MANUAL STORE
CHANNEL/FREQ.
SEARCH
FINE TUNING
PROGRAMME NR.
DECODER
STORE
3
Select the 'SEARCH' line.
C
4
Press the
button as often as necessary, until you
have found the right TV channel.
Note: If you want to allocate a decoder, switch the
decoder function on or off with the
ton in the 'DECODER' line.
* If you want to change the automatic channel setting,
select the 'FINE TUNING' line.
D
C
With the
or
matic TV channel setting.
Important: This re-tuning is only necessary and useful in
special cases, e.g. when there are stripes on the picture
with cable-TV systems.
5
In the 'PROGRAMME NR.' line use the
button to select the required programme number,
e.g.: 'P 01' .
6
Select and confirm the 'STORE' line.
7
If you want to search for further TV channels, start again
4
at step
. To finish, press the
STOP h
button. Press the
Sr
button on the set
v w
C-21
1
D
C
or
button you can vary the auto-
D
or
MENU
button twice.
but-
C
9
Advertisement
Table of Contents
