Philips 14PV274/05 Operating Instructions Manual page 2

&
Programming with 'VIDEOPlus+'
All the information required for programming is contained encoded in the 'VIDEOPlus+' code.
SV/V+
1 Press the button on the remote control.
2 Enter the entire 'VIDEOPlus+ code'. This code (up to 9 digits) is found next to the start time of a
TV programme in your TV guide.
If you entered an incorrect code number, clear it with the
3 If you want to repeat programming at daily or weekly intervals, select the required settings in
the 'DAILY/WEEKLY' line.
'Daily' programming can only be used for recordings to be made from Mondays to Fridays
inclusive.
4
After confirming the corresponding data appears on the TV screen.
Note: If you use VIDEOPlus+ for the first time, the 'PROGRAMME NR.' line appears when you
enter the VIDEOPlus+ code. Enter the required programme number.
d
DATE DW PR START END
01 01 17:15 18:45
v w x y 0-9
OK
OK
5 Confirm with the button.
The data has been stored in a TIMER block.
Please ensure that you loaded a cassette without erase protection.
STANDBY m
6 Press the button.
CLEAR b
button.
How to enter, check or clear a TIMER-block manually
TIMER k
1 Press the button.
2 Select a free TIMER block or the TIMER block you want to check or clear.
CLEAR b
3 Clear: Press the button.
D C
4 Enter/Check: Press the or menu button to switch between 'DATE' (date), 'DW' (daily,
weekly), 'PR' (programme number), 'START' (start time) and 'END' (end time).
A B
Press the and the or the
5 To end programming, press the MENU
STANDBY m
6 Press the button.
Selecting a TV channel
Select the required TV channel (= programme number) with the
buttons on the remote control.
The selected programme number (e.g.: 'P 01' ) appears in the upper right corner of the TV screen.
Volume control
Sp
You can control the volume level with the
porarily (e.g.: during a telephone call), press the
you press it again, the sound returns at the same volume level.
Picture control
You can control brightness, contrast, sharpness and colour here.
1 Press the MENU button.
2 Select and confirm the line 'PICTURE' .
3 Select and confirm the TV screen setting.
Note:
* In addition, you can adjust the tint for the playback of cassettes in the NTSC standard.
0-9 buttons to change the data.
button.
P p
button or the
button. If you want to mute the sound tem-
MUTE y
button on the remote control. When
0-9