Display (Dvi-I) Connector; Ext Sp 8 Ω (External Speaker Jack); Key Pad - Kenwood TS-890S In-Depth Manual

DiSPlaY (DVi-i) Connector

This connector is used for connection with an external monitor. It supports both digital signal and analog signal outputs.
The DISPLAY connector employs a DVI-I connector which is able to deliver high image quality when used together with
a DVI digital cable. Analog images can also be viewed on a D-SUB 15-pin analog RGB display monitor with the use of a
conversion connector and a special cable for the D-SUB 15-pin connector. Needless to say, it also supports the use of
DVI analog cables.
EXT SP 8 Ω (External Speaker Jack)
This jack is used for connection with an external speaker.
The built-in speaker will be muted when an external speaker is connected.

KeY PaD

Using the KEY PAD jack allows the number of PF keys to be increased.
Connecting user-made PF keys to the KEY PAD jack enables a maximum of eight PF functions to be assigned to them.
For example, assigning the channel number of a message memory to a [PF] key enables content of the message
memory to be transmitted at a single touch, and this is an effective method such as when speedy operation is required
during a contest.
To make your own PF keypad, refer to the following circuit diagram.
Fig. 77 DVI (Male) - VGA (Female) Conversion Connector (Example)
Fig. 78 KEYPAD Circuit Example
terminal FUnCtiOnS 10
77