Siemens 7XV5655-0BB00 Manual page 37

Configuring the Serial Modem with the Configuration Tool
The configuration tool provides a practical way of making "basic settings" such as
modem name, IP address and baudrate of the Serial Modem.
For this purpose, the configuration tool is started and finds all Serial Modems in the
same network segment which it then lists in a table.
All settings can also be made with AT commands via the serial interface. Password
protection and protected call acceptance are only possible via this interface.
Overview Window
The configuration program finds all devices in its own network segment, even those
without a valid IP address.
Clicking on the column header in the overview, e.g. "IP address", sorts the devices in
ascending or descending order of the items in that column.
Items in the Overview Window:
Name
IP Address
Subnet Mask
Gateway
MAC
Device Type
Version
Info
In Use
UDP-Port 3497
SIEMENS AG
Modem name for better identification by means of a self-
explanatory text.
Current IP address
Current Subnet Mask
Current Gateway
Worldwide unique MAC address
Device Type
Current firmware version
Currently configured COM port (not available for Serial
Modems)
If the entry is "YES", the device is in connection mode and
it is not possible to make changes to the settings.
If this entry is "NO", the device will no longer be found. It is
not connected, deactivated, or is behind a router that is
blocking the UDP port 3497.
Page 37 of 79
Manual 7XV5655-0BB00
C53000-G1176-C175-3