Advertisement
EnglisH
1
Cleaning
Never use scouring pads, abrasive cleaning agents or aggressive liquids
such as petrol or acetone to clean the appliance.
Note: The appliance does not need to be lubricated.
1
Switch off the appliance, pull the adapter out of the wall socket and
pull the appliance plug out of the appliance.
Remove any comb and/or attachment from the appliance.
Blow and/or shake out any hair that has accumulated in the
attachments and/or combs.
Clean the attachments and the combs with the cleaning brush or
under the tap.
Note: To clean the micro shaver, see section 'Cleaning the micro shaver' below.
5
Clean the adapter and the handle with the cleaning brush or with a
dry cloth.
Keep the adapter dry.
Cleaning the micro shaver
The shaving foil is very delicate. Handle it carefully. Replace the shaving
unit if the shaving foil is damaged.
1
Pull the shaving foil unit in the direction of the arrow to remove it
from the bottom part of the micro shaver (Fig. ).
Clean the cutter and its surroundings and the inside of the shaving
foil unit carefully with the cleaning brush or under the tap.
replacement
If the adapter is damaged, always have it replaced with one of the original
type in order to avoid a hazard.
Only replace damaged or worn attachments or combs with original
Philips replacement attachments or combs
Advertisement
