Motorola Avigilon H5M Installation Manual page 17

a. Thread one end of the Ethernet cable through the protective cable boot.
Ensure the orientation of the cable and boot matches the one shown in the image.
b. Crimp the Ethernet cable.
c. After you connect the cable to the camera, slide the boot over the Ethernet port.
2. Connect the Ethernet port attached to the camera to the Ethernet cable that was pulled through the
adapter.
The connection status LED indicator will blink when the connection is being established and will turn
off once streaming has started.
3. Align the camera housing clips on the camera base to the camera attachment edge on the mounting
Installing the Camera Body to the Mounting Adapter 17