Technical Data; Ec Declaration Of Conformity - DeWalt D25330 Series Manual

E N G L I S H
CHIPPING HAMMER D25330K
Congratulations!
You have chosen a D
E
experience, thorough product development and
innovation make D WALT one of the most reliable
E
partners for professional power tool users.

Technical data

Voltage
(U.K. & Ireland only)
Power input
Impact rate
Impact energy
Chisel positions
Tool holder
Collar diameter
Weight
Fuses:
Europe 230 V tools
U.K. & Ireland 230 V tools
The following symbols are used throughout this
manual:
Denotes risk of personal injury, loss of life
or damage to the tool in case of non-
observance of the instructions in this
manual.
Denotes risk of electric shock.
Fire hazard.
16
WALT tool. Years of
D25330K
V 230
V 230/115
W 650
min -1 4,100
J 3.1
12
SDS-plus
mm 54
kg 2.9
10 Amperes, mains
13 Amperes, in plugs
EC-Declaration of conformity
D25330K
D WALT declares that these power tools have been
E
designed in compliance with: 98/37/EEC,
89/336/EEC, 73/23/EEC, 2000/14/EC-Annex VI,
EN 50144, EN 55014-1, EN 55014-2, EN 61000-3-2
& EN 61000-3-3
For more information, please contact D
address below, or refer to the back of the manual.
Level of acoustic power according to 2000/14/EC
®
(Article 12, Annex III No. 10; m 15 kg):
L (measured)
WA
L (guaranteed)
WA
Level of sound pressure according to 86/188/EEC &
98/37/EEC, measured according to EN 50144:
L
pA
* at the operator's ear
Take appropriate measures for the
protection of hearing.
Weighted root mean square acceleration value
according to EN 50144-1 & EN 50144-2-6:
Director Engineering and Product Development
Horst Großmann
D WALT, Richard-Klinger-Straße 11
E
D-65510, Idstein, Germany
WALT at the
E
D25330K
dB(A) 100
dB(A) 105
D25330K
dB(A)* 87
D25330K
2
7.2 m/s