Whirlpool HB21417 Operation Manual page 37

th
6）6 Sense De‐odor Function
th
Press "6 Sense" button, the LCD displays "

th
In 6 Sense mode, the machine will automatically detect the odor of the bathroom

and run the de‐odor function. The air quality light will indicate the odor level, Red
indicator light means "Poor", the machine will run at "Hi" mode; Orange indicator light
means "Fair", and the machine will run at "Mid" mode; Green indicator light means
"Good", and the machine will run at "Lo" mode.
Timer: the default time is 2 hrs. By pressing "Timer" up or down button to select time

duration. The time can be set from 5 mins to 24 hrs. The time counter will be displayed
on the LCD. The time selected will be recorded in memory when it is off, and will
resume in your next usage.
Stop: when press the "Stop" button or the pre‐set time runs over, the LCD "

the time display would disappear, and the machine will stop automatically.
Every time when connecting to the power, it takes 5 mins for the sensor to get ready

th
before 6 Sense function can be activated.
7） Other
24H Vent Function
Press the "24H Vent" button，the LCD displays "24H Vent" icon, the air volume will run

at "Lo" mode. The default running time is 24 hrs.
Stop: when press the "Stop" button or the default time runs over, the LCD "24H Vent"

and the time display would disappear, and the machine will stop automatically.
Delay Vent Function
Start: press the "Delay Vent" button，the LCD displays "Vent" icon, the air volume will

run at "Lo" mode. The default running time is 15 mins.
Stop: when press the "Stop" button or the default time runs over, the LCD "Vent" and

the time display would disappear, and the machine will stop automatically.
Swing Function – Auto (Up / down)
When the circulation fan motor is running, the default louver position is 90 degree.

Press the "Swing" button to adjust the louver angle. The LCD will display "
Swing function is not valid under the modes of "Vent", 24H Vent", "Delay Vent" and
th
"6 Sense".
Swing: when the circulation fan motor is running, press the "Swing" button, the louver

will turn from 90 degree position to swing ranging from 45 degree to 120 degree. Press
the "Swing" button again, auto louver will stop at the desired angle.
Stop: when press the "Stop" button or the pre‐set time runs over, the louver will

return to 0 degree position (auto louver will stop operate).
" icon.
‐ 16 ‐
" and
" icon.