ABB LWT300 Series User Manual page 95

Register name Register
address
Level Sensor ID 3001
1
# Levels 3002
Error Code 3003
Warning alarms 3004
Level 1 (top) 7001
Level 2 (Interface) 7003
temperature 7005
DIp Switch Status 10000
hMI Software 10001
Revision
tpROC alarm 10002
1 Registers 3001, 3002, 3003, 3004, 7001, 7003 and 7005 are used to emulate an ABB LevelMaster
Data type Swap mode
UINT16
UINT16
UINT16
UINT16
Float32 Reg. 3000
Float32 Reg. 3000
Float32 Reg. 3000
UINT16
UINT16
UINT16
Description
ID = Modbus address, 0-247 Valid[Native Byte]
1 or 2 Levels Valid[Native Byte]
Single highest alarm bit value[Native 16 Int]
Diagnosis Condition Details priority [0 = No Error, else =
Error/Warning with highest priority
NOTE: the higher the number is, higher is the priority
top Liquid height from bottom (Inches)
Interface Liquid height from bottom (Inches)
tank temperature (Deg F)
On-Board DIp Switch Status
hMI Software Revision
External temperature additionnal status
Modbus registers B91