ABB Z-MT Commissioning And Calibration Procedures page 10

From
Fuel ? xxxxxxxx xx
Cell T/C?
o r
Enter
Basic Analysers
To
CO Signal xxxxx & ENT
Flue T/C?
o r
Enter
Air T/C?
o r
Enter
From
Cell T/C? xxxxx & ENT
CO Signal
8
Continued from previous page.
Cell Thermocouple
yes & ENT
Select whether or not a cell thermocouple is to be used:
no & ENT
If cell thermocouple is used (general applications).
yes
or
If cell thermocouple is not used (special applications only).
no
N o t e . A preset cell temperature (>600°C) must be used if 'no' is selected.
Store.
Advance to Carbon Monoxide Signal
or
Advanced
Analysers
Advance to next parameter (advance analysers).
Flue Thermocouple
yes & ENT
Select whether or not a flue thermocouple is to be used:
no & ENT
If flue thermocouple is used.
yes
or
If flue thermocouple is never to be used.
no
Store.
Advance to next parameter.
Air Thermocouple
yes & ENT
Select whether or not an air thermocouple is to be used:
no & ENT
If air thermocouple is used.
yes
or
If air thermocouple is never to be used.
no
Store.
Advance to next parameter.
Carbon Monoxide Signal
yes
A signal from an external carbon monoxide monitor can be used for display of
no
carbon monoxide content in the Carbon Dioxide/Carbon Monoxide P –
see Operating Instructions.
Continued opposite.
(basic analysers).