Table of Contents
Advertisement
ENGLISH
23
Point-to-Point Over Ethernet (PPPoE)
Enter the PPPoE User Name and Password assigned by your Service
Provider.The Service Name is normally optional, but may be required by
some service providers.
The MTU (Maximum Transmission Unit) governs the maximum size of the
data packets. Leave this on the default value (1492) unless you have a
particular reason to change it.
Enter a Maximum Idle Time (in minutes) to define a maximum period of
time for which the Internet connection is maintained during inactivity.
If the connection is inactive for longer than the Maximum Idle Time, it will
be dropped. (Default: 10 minutes)
Enable the Auto-reconnect option to automatically re-establish the
connection as soon as you attempt to access the Internet again.
Point-to-Point Tunneling Protocol (PPTP)
Point-to-Point Tunneling Protocol (PPTP) can be used to join different
physical networks using the Internet as an intermediary. Using the above
screen allows client PCs to establish a normal PPTP session and provides
hassle-free configuration of the PPTP client on each client PC.
Enter the assigned IP address, subnet mask and default gateway IP address
(usually supplied by your ISP), and then the PPTP User ID, Password and
PPPTP Gateway IP address.
The MTU (Maximum Transmission Unit) governs the maximum size of the
Advertisement
Table of Contents
