Table of Contents
Advertisement
LED
Power
Wireless
(Wireless
home network)
Modem
(Internet modem)
1/2/3/4 LAN
(Wired home network) Blue (100 Mbps)
Your Wireless Base Station 11g
1 Antennas
For connecting to your Wireless Network Adapters
(also called WLAN or WiFi).
2 Reset button
• Press it for 2 seconds to reboot the wireless base station 11g.
• Keep it pressed for more than 5 seconds to restore the factory
default settings.
3 Ethernet ports
RJ-45 sockets for Broadband Modem and Ethernet network cables.
4 Power
Socket for connecting the power adapter to the Wireless Base Station 11g.
5 Indicator LEDs
Display the network status.
LED colour
Blue
Blue
Blue
Yellow (10 Mbps)
6 Label with MAC address
The MAC address consists of 12 characters (e.g. 00:30:F1:A1:F4:A5 or, in
general, xx:xx:xx:xx:xx:xx) and is the unique hardware address of this
network device. Some safety features or network identification purposes
need this MAC address.
Meaning
Off when power is disconnected
On when receiving power.
Blinking when rebooting
Off when wireless is disabled.
On when wireless enabled and client active.
Blinking when transmitting.
Off when not connected
On when a link is established.
Blinking when transmitting.
Off when not connected
On when a link is established.
Blinking when transmitting.
ENGLISH
7
Advertisement
Table of Contents
