Toro EVOLUTION Series Installation Manual page 2

1
Open the EVOLUTION controller.
4
Remove power from the controller.
• Unplug AC (preferred) OR
• Remove ribbon cable
6
Controller will automatically recognize USB
drive and upgrade the controller.
Cycle power when prompted.
9
Firmware file is updated.
A status bar will indicate progress.
12
Remove USB drive if desired.
Upgrade from Version 2.0 and Earlier:
2
If backup battery is present,
remove it.
5
Hold finger on DOWN button
AND...
7
Remove power from the controller.
10
Controller resets and is updated!
Congratulations!
Your EVOLUTION controller is now
ready to work with Smart Connect.
A video demonstrating the firmware
upgrade procedure is available at:
www.toro.com/evolution
(US & Canada)
www.toroevolution.com
3
Insert USB drive into controller USB slot.
At the same time:
...return power to the controller.
• Plug AC power back in OR
• Reattach ribbon cable
8
...return power to the controller.
11
ADVANCED-->FIRMWARE-->VERSION
and confirm firmware update to 2.13.
(int'l).
Go to