Toro EVOLUTION Series Installation Manual page 3

1
Open the EVOLUTION controller.
4
Navigate to UPDATE.
Press SELECT.
7
Controller displays the firmware version in
the controller (current) and the version on
the USB drive (update).
If the update version is more up-to-date
than the current version, press SELECT on
YES.
10
Go to
ADVANCED-->FIRMWARE-->VERSION
and confirm firmware update to 2.13.
©2015 The Toro Company, Irrigation Division • www.toro.com
Upgrade to Version 2.13 and Later:
2
Confirm USB drive is in the controller
5
Navigate to UPDATE.
8
Firmware file is updated.
A status bar will indicate progress.
Remove USB drive if desired.
Technical Support:
USB slot.
Press SELECT.
1-877-345-8676 evolution@toro.com
(USA & Canada)
3
Enter the ADVANCED menu.
Navigate to FIRMWARE.
Press SELECT.
6
Controller verifies the file on the USB drive
is valid.
9
Controller does a soft reboot and is updated!
Congratulations!
Your EVOLUTION controller is now
ready to work with Smart Connect.
A video demonstrating the firmware
upgrade procedure is available at:
www.toro.com/evolution
(US & Canada)
www.toroevolution.com
(international)
Form Number 373-0854 Rev. A
(int'l).