Advertisement
(19) Reattach the cover removed in step (7) to the
Finisher. (Three screws)
Note:
Hook the tab on the plate to the cover.
(20)
<C554e/C454e/C364e/C284e/C224e/C554/C454/
C364/C284/C224/C368/C308/554e/454e/364e/
284e/224e>
Attach the supplied front cover.
Front cover
<367/287/227>
a) Remove the screw shown in the illustration
from the finisher.
Note:
Discard the removed screw.
b) Install the cover D supplied with the MK-602 at
the position as shown in the illustration. (One
screw F supplied with the MK-602)
(21) Install the finisher to the main unit.
Note:
<C554e/C454e/C364e/C284e/C224e/C554/C454/
C364/C284/C224/C368/C308/554e/454e/364e/
284e/224e>
See the installation manual for the Finisher FS-
533 for installation instructions.
<367/287/227>
See the installation manual for the Mount Kit/Fin-
isher MK-602/FS-533 for installation instructions.
Note:
• Before installing the finisher, be sure to check
that the punch unit is securely locked into the
finisher.
• Do not install the rail cover supplied with the fin-
isher. (The cover is unnecessary, so discard it.)
E-5
Advertisement
