Advertisement
Figure 7
Trencher Setup Screen
1. Autotilt Setup button
5. Press 2 to select Autotilt Setup (Figure 7).
The Autotilt Setup Screen displays (Figure 8).
Figure 8
Autotilt Setup Screen
1. Set Left button
2. Set Center button
3. Set Right button
6. Using the manual tilt toggle switch, located on the rear
console of the machine, tilt the machine to the full left
position.
7. Press button 1 to select Set Left (Figure 8) and wait
unit the left indicator light turns green (approximately
10 seconds).
4. Exit button
5. Machine icon with indicator
lights
8. Use the toggle switch to return the machine to the level
position.
9. Press button 2 to select Set Center (Figure 8) and
wait unit the center indicator light turns green
(approximately 10 seconds).
10. Use the toggle switch to tilt the machine to the full
right position.
11. Press and hold button 3 to select Set Right (Figure
8) and wait unit the right indicator light turns green
(approximately 10 seconds).
12. Return the machine to the level position.
13. Press 4 to select Exit when the indicator light next to
the Exit button turns green (Figure 8).
Note: You cannot exit this screen until all three positions
have been set. Should you need to exit without completing
the setup, turn off the key switch.
Operation
When the switch is in the On position, the Auto-tilt Chassis
feature keeps the chassis near level as you drive the machine.
Turn off the Auto-tilt switch to return to manual chassis-tilt
operation.
3
Advertisement
