Operating Environment - Epson S5U1C33001H1400 Manual

2. OVERVIEW
*3 Supports 32 kHz by firmware update.
*4 Available only when the S1C33 model that supports the user logic signal trace function is used.
Supports by firmware update.
*5
*6 The product does not include a 30-pin cable for connecting to target systems or a connector for this cable. Please
contact us if you need a 30-pin cable.
Table 2 Correspondence between C33 cores and debug functions
Function
DCLK while the program is halted
DCLK while the program is being
executed
PC trace method
Switching the DCLK-core clock
ratio
(DCLK while the program is
halted)
Address setup for the debug unit
Area break function
Bus break function
Bus break trigger trace function
TRC IN pin input signal trace
function
User logic signal trace function *7
Use of MMU in debug mode
*7 Available only in S1C33 models that support the user logic signal trace function.
Except for the PC trace, Level 2 is upwardly compatible with Level 1 and realizes higher analytical accuracy than Level 1.
Functions not listed in the above table can be used regardless of the core model.
2.2

Operating environment

As the host computer, the S5U1C33001H1400 uses a PC with a USB port (USB 1.1) available.
Windows 2000 or Windows XP is recommended for the OS.
6
Core
C33 STDMini
= Bus clock
= Core clock
Level 1
-
-
-
-
-
-
-
-
C33 PE
= Core clock x set value
= Core clock
Level 1
-
-
-
-
-
-
EPSON
S5U1C33001H1400 Manual (Rev. 0.20)
C33 ADV
= Core clock x set value
= Core clock
Level 2
-
S1C33 Family In-Circuit Debugger