Download Print this page

Philips DVD750VR/99 Quick Use Manual

Dvd player
Hide thumbs Also See for DVD750VR/99:

Advertisement

Quick Links

750VR qug3
30/07/2003
4:57 PM
Quick-Use Guide
Quick-Use Guide
There are many ways to connect your new DVD/VCR to your Television and other equipment.This Quick-Use
Guide shows the easiest, most common connection.
Higher quality connections are explained in the accompanying owner's manual and will provide better sound or
picture if your TV and/or audio system is compatible.
REAR OF TV
(EXAMPLE ONLY)
ANTENNA IN
Disconnect all equipment from the power outlets. Connect the equipment to the power outlets only after you
1
have finished hooking up everything. Never make or change connections with equipment connected to the power outlet.
If you do not have a Cable Box, simply connect your Antenna or Cable TV signal directly to the ANT -IN jack
2
on the rear of the DVD/VCR.
If you do have a Cable Box (or Satellite Receiver), first connect the Cable TV (or Satellite) signal to the IN
jack on the Cable Box/Satellite Receiver. Then, use an RF coaxial cable (like the one supplied) to connect the
OUT jack of the Cable Box/Satellite Receiver to the ANT -IN jack on the DVD/VCR.
Connect the supplied black RF coaxial cable to the DVD/VCR's ANT -OUT jack and to your TV's ANTENNA
3
IN jack. The TV's ANTENNA IN jack could be labelled 75-ohm, TV IN, or RF IN. Check your TV manual for details.
Set the INTERLACE/PROGRESSIVE SCAN SELECTOR to INTERLACE (I).
4
Connect the power cords of the DVD/VCR,TV, and Cable Box (if applicable) to a power outlet.
5
Turn on the TV power. Set the TV to channel 3. (If you cannot use channel 3 at your TV, you can use channel 4
6
instead. However, you must set the DVD/VCR's output channel to 4. See the accompanying DVD/VCR owner's manu-
al for details.)
Press STANDBY-ON 2 on the DVD/VCR or its remote to turn on the DVD/VCR. The first time you
7
turn on the DVD/VCR, you should complete the VCR setup. See the other side of this Quick-Use Guide
for details.
Page 1
CABLE BOX
OR
IN
OUT
CABLE
TV SIGNAL
RF COAXIAL CABLE
DVD/VCR
AUDIO OUT AUDIO IN
ANT-IN
VIDEO OUT VIDEO IN
ANT-OUT
3
ANTENNA or
CABLE TV SIGNAL
2
VCR
4
S-VIDEO
COMPONENT
OUT
VIDEO OUT
L
L
R
R
PROGRESSIVE
I
P
DVD750VR
DVD750VR
5
DVD
AUDIO
DIGITAL
OUT
AUDIO OUT
Y
Pb/
L
Cb
COAXIAL
Pr/
R
Cr

Advertisement

loading

Summary of Contents for Philips DVD750VR/99

  • Page 1 750VR qug3 30/07/2003 4:57 PM Page 1 Quick-Use Guide Quick-Use Guide There are many ways to connect your new DVD/VCR to your Television and other equipment.This Quick-Use Guide shows the easiest, most common connection. Higher quality connections are explained in the accompanying owner’s manual and will provide better sound or picture if your TV and/or audio system is compatible.
  • Page 2 750VR qug3 30/07/2003 4:57 PM Page 2 Quick-Use Guide (cont’d) Quick-Use Guide (cont’d) Setting Up the VCR the First Time Turn on the TV and set it to channel 3. Press VCR, then press STANDBY-ON 2 to turn on the DVD/VCR. This display will appear only the first time you turn on the DVD/VCR.

This manual is also suitable for:

Dvd750vr