On-Screen Status Displays (Vcr) 23 - Philips DV910VHS98 Owner's Manual

DV910(H9100).QX33 01.8.9 10:26 AM
A status display will appear when you press the
DISPLAY/STATUS/EXIT button or certain function buttons.The con-
tents of the status display will vary.To choose the status display
mode, follow the steps below.
Before you begin, place the DVD/VCR in VCR mode. Press the
OUTPUT SELECT button so that the green VCR OUTPUT light
appears on the front of the DVD/VCR. Press the VCR/TV button
so that the VCR/TV light appears on the front of the DVD/VCR.
If you select STATUS ON, then select COUNTER ONLY
ON:
Whenever you press the Stop C button or the Play B button, the
status display will appear for five seconds.After five seconds, only
the counter will remain on the screen.You must press the DIS-
PLAY/STATUS/EXIT button to remove it. Portions of the status
display also may appear when you press other function buttons.
If you select STATUS ON, then select COUNTER ONLY
OFF:
Whenever you press the Stop C button or the Play B button, the
status display will appear for five seconds. Portions of the status
display also may appear when you press other function buttons.
If you select STATUS OFF:
The status display will not appear when you press function but-
tons.You must press the DISPLAY/STATUS/EXIT button to see the
status display.
1
Press the VCR button, then press the MENU button.
2
Press the Play B button or the Stop C button to select VCR
SET UP , then press the Fast Forward g button.
3
Press the Play B button or the Stop C button to select ON
SCREEN MODE, then press the Fast Forward g button.
4
Press the Play B button or the Stop C button to select
STATUS, then press the Fast Forward g button so that
ON (or OFF) appears beside STATUS.
SELECT op CHOOSE B
STATUS
COUNTER ONLY
TO END PUSH EXIT
5
If you set STATUS to OFF, go to step 6. If you set STATUS
to ON, press the Play B button or the Stop C button to
select COUNTER ONLY, then press the Fast Forward g
button so that OFF (or ON) appears beside it.
6
Press the DISPLAY/STATUS/EXIT button.
Page 23

On-Screen Status Displays (VCR) 23

[ON]
[OFF]
Receiving,
Recording
Mode
Tape
status
Time
STOP 12:00 AM
TV STEREO CH10
STEREO
2ND AUD
SLP M 1:23:45 HIFI
Audio
Tape
Out
Speed
Mode
Counter,
Counter
MTS
Memory
Broadcast
Available
Helpful Hints
• You may not access a status display
when viewing a still picture, during
slow motion playback, or during for-
ward or reverse searching.
• The status display may not appear if
a weak channel is selected and
BLUE BACKGROUND is OFF.
Details are on page 49.
Channel