Schedule Radio-To-Usb Record - Philips FWM462X/78 User Manual

2
Press to stop recording.
Tip
If the USB storage device does not have
•
enough memory to store the audio files, a
message about a full memory is displayed.
• Anytime recording is not available for CD-MP3
and CD-WMA discs.
Anytime recording is not available for
•
High speed recording.
Schedule radio-to-USB
record
Schedule radio recordings in advance and you can
listen to your favorite programs at your convenience.
Note
• A recording is activated only in the standby mode.
•
The maximum length of a recording is 12 hours.
1
Ensure that you set the clock correctly.
2
Plug the USB device into the
this unit.
3
Tune to a radio station.
4
Press to switch to standby mode.
5
Press and hold SLEEP/TIMER for more
than 2 seconds.
»
A prompt to select the source is displayed.
6
Press TUNER repeatedly to select FM or AM.
7
Press USB RECORD.
»
The start timer digits are displayed and
begin to blink.
8
Press ALBUM +/-
9
Press TITLE+/- / to set the minute.
10
Press SLEEP/TIMER to confirm.
»
The end timer digits are displayed and
begin to blink.
11
Press ALBUM +/-
12
Press TITLE+/- / to set the minute.
17 EN
socket of
/ to set the hour.
/ to set the hour.
13
Press SLEEP/TIMER to confirm.
»
is displayed.
»
At the scheduled times, the recording
begins and ends automatically.
»
When the recording ends, the unit
switches to standby mode.
To deactivate or re-activate a record timer
1
In the standby mode, press SLEEP/TIMER
repeatedly.
»
If the timer is activated,
»
If the timer is deactivated,
disappears.
is displayed.