Usb Record; Record To Usb; Schedule Radio-To-Usb Record - Philips FWM462X/77 User Manual

8 USB record

Audio CD tracks, MP3 files, radio and audio
from external devices are recorded in .mp3
format, and WMA files are recorded in .wma
format.
The first time you record to USB, a folder
called 'PHILIPS' is automatically created in the
USB device. Each time you record to USB, the
recorded files are stored in a sub-folder in the
'PHILIPS' folder. Files and sub-folders are named
numerically in the order in which they are
created.

Record to USB

1
Plug the USB device into the
this unit.
2
Prepare the source to record from.
• Disc - Select the disc source and load
a disc. You can select a track from
which a recording starts.
• Radio - Tune to a radio station.
• MP3 LINK/AUX - Select the MP3
link/AUX source, then connect and
start to play an external device.
3
Press USB RECORD to start recording.
• For discs, press
repeatedly to select:
A [REC ONE] (record one): the first/
current track is recorded.
B [REC ALL] (record all): all tracks/the
remaining tracks are recorded.
Disc play starts automatically from the
»
beginning of the disc/the selected track,
and the recording starts.
» To stop recording, press
Note
•
If the USB device does not have enough
memory to store the audio files, a message
about a full memory is displayed.
socket of
USB RECORD
.
Schedule radio-to-USB
record
Schedule radio recordings in advance and you can
listen to your favorite programs at your convenience.
Note
•
A recording is activated only in the standby mode.
•
The maximum length of a recording is 12 hours.
1
Ensure that you set the clock correctly.
2
Plug the USB device into the
this unit.
3
Tune to a radio station.
4
Press to switch to standby mode.
5
Press and hold SLEEP/TIMER for more
than 2 seconds.
» A prompt to select the source is displayed.
6
Press TUNER repeatedly to select FM or AM.
7
Press USB RECORD.
» The start timer digits are displayed and
begin to blink.
8
Press ALBUM +/-
9
Press TITLE+/- / to set the minute.
10
Press SLEEP/TIMER to confirm.
» The end timer digits are displayed and
begin to blink.
11
Press ALBUM +/-
12
Press TITLE+/- / to set the minute.
13
Press SLEEP/TIMER to confirm.
is displayed.
»
» At the scheduled times, the recording
begins and ends automatically.
» When the recording ends, the unit
switches to standby mode.
To deactivate or re-activate a record timer
1
In the standby mode, press SLEEP/TIMER
repeatedly.
If the timer is activated,
»
If the timer is deactivated,
»
disappears.
socket of
/ to set the hour.
/ to set the hour.
is displayed.
EN
16