Table of Contents
Advertisement
9 Other features
Set the alarm timer
This unit can be used as an alarm clock. The
disc, radio or USB is activated to play at a
preset time.
Note
•
If you have set a record timer and an alarm
timer, only the latest timer is activated.
1
Ensure that you have set the clock
correctly.
2
Press
to switch to standby mode.
3
Press and hold SLEEP/TIMER for more
than 2 seconds.
»
A prompt to select the source is
displayed.
4
Press CD 1/2/3, or TUNER or USB to
select a source.
5
Press SLEEP/TIMER to confirm.
»
The clock digits are displayed and
begin to blink.
6
Press ALBUM +/-
7
Press TITLE+/- / to set the minute.
8
Press SLEEP/TIMER to confirm.
»
The timer is set and activated.
To deactivate or re-activate an alarm timer
1
In the standby mode, press SLEEP/TIMER
repeatedly.
»
If the timer is activated,
If the timer is deactivated,
»
disappears.
Tip
•
In MP3 link or AUX mode, the alarm timer
cannot be set.
•
If disc or USB source is selected but no
audio file can be played, radio is activated
automatically.
EN
17
/
to set the hour.
is displayed.
Set the sleep timer
This unit can switch to standby automatically
after a set period of time.
1
When the unit is turned on, press SLEEP/
TIMER repeatedly to select a set period
of time (in minutes).
When sleep timer is activated,
»
displayed.
To deactivate sleep timer
1
Press SLEEP/TIMER repeatedly until
[OFF] (off) is displayed.
When sleep timer is deactivated,
»
disappears on the display.
Listen to an external device
You can listen to an external audio device
through this unit.
For audio players with headphone sockets
1
Press MP3 LINK/AUX repeatedly to
select the MP3 link source.
2
Connect the supplied MP3 link cable to:
•
the
MP3 LINK jack (3.5mm) on the
unit.
•
the headphone jack on an external
device.
3
Start to play the device (refer to the
device's user manual).
For audio players with red/white audio output
sockets
1
Press MP3 LINK/AUX repeatedly to
select the AUX source.
2
Connect the audio cables (white/red
jacks, not supplied) to:
AUX IN jacks on the back of the
•
the
unit.
•
the AUDIO OUT
external device.
3
Start to play the device (refer to the
device's user manual).
is
jacks on an
Advertisement
Table of Contents
