Motorola Voiceducer MDRMN4044 Manual page 8

2. Connect the ear microphone
to the interface module and
tighten by turning the outer
ring clockwise.
3. Connect the interface module to your radio.
For optimum performance, be sure that the
interface module cable or finger PTT switch
cable is routed away from the radio antenna.
4. Secure the radio and interface module in
place, for example, by clipping them to your
belt.
5. Carefully insert the earpiece into the ear as
shown.
6. Push the ear microphone toward the ear
canal, jiggling the earpiece slightly until it is
seated firmly in the ear.
7. Loop the cord over and behind the ear. Note
the position of the cord where it intersects
the ear microphone: the cord points forward
about 45 degrees.
8. There are two styles of ear holders available
as optional accessories that provide added
security in keeping the earpiece firmly
positioned in the ear. You may purchase an
ear holder in a specific size, (S, M, L), and
color, (black or clear), or an adjustable ear
holder (black only), which is designed to
reduce "cord noise." This particular ear
holder is recommended for VOX (Voice-
Activated) operations to prevent inadvertent
"keying" of the VOX circuit due to "cord
noise." The size of the ear holder should be
7
MAEPF-26898-O
MAEPF-26899-O