Motorola Voiceducer MDRMN4044 Manual page 9

adjusted to fit your ear prior to the start
of VOICEDUCER communications, and
is done as follows:
• To adjust the size, first remove the
outer clip from the ear holder
housing. This will allow you to open
the inner holder. Position the rubber
tabs in the appropriate slots to
achieve the desired size.
• Align the earpiece cable along the
grooves inside the holder. Leave
approximately three inches (7 cm)
of cable between the earpiece and
ear holder as shown in the drawing.
• Close the holder and reattach the
outer clip.
• Insert the earpiece in the ear as
described in Steps 5, 6, and 7. Put
the ear holder up against the ear
and pull the ear through the slot. Be
sure that the earpiece is firmly in
the ear canal to ensure proper
communications.
9. The ear microphone comes equipped
with both Medium and Large size ear
tips. Depending on whether the
earpiece feels too loose or too tight, try
switching ear tips to determine a
suitable fit.
8
MAEPF-26901-O