Video Settings; Audio Settings - Panasonic TY-SB01SS Operating Instructions Manual

Video settings

By installing this product in a compatible display and
setting the display's input to [SLOT], video setting can
be made.
The setting can be made on [Signal] for the main unit
menu.
■
[SDI format select]
Select the 3G-SDI format.
[Auto]:
Automatically detects the input signal format.
[3G 4:2:2 YC C 10bit], [3G 4:4:4 YC
B R
4:4:4 RGB 10bit], [3G 4:2:2 YC
[3G 4:4:4 YC C 12bit], [3G 4:4:4 RGB 12bit]:
B R
If the video is not correctly displayed because the
Payload ID is not superimposed or for other reasons,
the above formats can be selected manually.
Note
●
To display HD-SDI or SD-SDI video signal, select
[Auto].
●
To display 8bit signals, select a corresponding 10bit
format.
■
Input signal display
Display the frequency of the signal currently being input
and the type of signal.
H-freq. 33.72
V-freq. 60.00
74.18
Dot clock freq.
Signal format 1080/60i
No ID
Status
[Status]:
If the input signal has any of the following errors, a
message is displayed.
[No ID]
Payload ID has not been superimposed.
[ID]
Payload ID does not match the horizontal / vertical
information of SDI signal.
[CRCC]
Displayed when CRCC error occurs due to poor
signal quality, etc. (A high-frequency cable such as
5C- FB may not be used for transmission.)
C 10bit], [3G
B R
C 12bit],
B R
kHz
Hz
MHz

Audio settings

By installing this product in a compatible display and
setting the display's input to [SLOT], audio setting can
be made.
The setting can be made on [Sound] for the main unit
menu.
■
[Group select]
Select the audio group multiplexed to the SDI signal.
[Channel 1-8]:
Selects channel 1 to channel 8.
[Channel 9-16]:
Selects channel 9 to channel 16.
■
[Left channel]
Select the channel of SDI audio to be output to the left
channel.
When [Channel 1-8] is selected for [Group select], the
channel can be selected from 1 to 8.
When [Channel 9-16] is selected for [Group select],
the channel can be selected from 9 to 16.
■
[Right channel]
Select the channel of SDI audio to be output to the right
channel.
When [Channel 1-8] is selected for [Group select], the
channel can be selected from 1 to 8.
When [Channel 9-16] is selected for [Group select],
the channel can be selected from 9 to 16.
Note
●
This product supports the following audio signals.
3G-SDI: 48kHz, video synchronization, 16CH
•
compatible
HD-SDI: 48kHz, video synchronization, 8CH
•
compatible
SD-SDI: 48kHz, video synchronization, 4CH
•
compatible
●
Audio is not output if audio channels to which audio
are not multiplexed.
5
English