Saving Energy And Detergent; Programme Default Settings; Spin Speed; Ready In Time - Siemens WM Series Instruction Manual And Installation Instructions

Saving energy and detergent

For light and normal soiling, you can
save energy (lower washing
temperature) and detergent.
Saving Soiling/note
Reduced temper- Light
ature and deter- No visible dirt or stains. Cloth-
gent quantity as ing has taken on some body
per the recom- odour, e.g.:
mended dosage
■
■
■
Normal
Visible dirt or a few light
stains, e.g.:
■
■
Temperature as Heavy
per the care label
Dirt and/or stains clearly visi-
and detergent
ble, e.g. tea towels, baby
quantity as per
items, work clothing
the recom-
mended dosage
for heavy soiling
When measuring the amount of
Note:
all detergents/additives/care products
and cleaning agents, please always
check the manufacturer's instructions
and information. ~ Page 14
Light summer/sports
clothing (worn for a few
hours)
T-shirts, shirts, blouses
(worn for up to one day)
Guest bed linen and hand
towels (used for one day)
T-shirts, shirts, blouses
(sweat soaked, worn a
few times)
Towels, bedding (used for
up to one week)

Programme default settings

0
Programme default
settings
You can find possible
Note:
P r o g r a m m e d e f a u l t s e t t i n g s
programme default settings in the
overview; these differ depending on the
model.
The programme default settings for all
programmes are preset at the factory
and are displayed in the display panel
after the programme is selected.

Spin speed

(0)
Depending on the programme
progress, you can change the spin
speed (in rpm; revolutions per minute)
before and during the programme.
To do this, press the spin speed button
repeatedly until the required spin speed
is displayed in the display panel. The
maximum speed that can be selected
depends on the model and programme
that has been selected.
Setting 2: Rinse hold = without final
spin. The laundry remains in the water
after the final rinse to prevent creasing if
the laundry will not be taken out of the
washing machine immediately.

Ready in time

(0)
Before starting the programme, the
programme end Ready in time can be
preselected in hourly increments (h =
hours) up to a maximum of 24 hours.
Select the required programme.
1.
The programme duration is
Note:
displayed in the display panel.
Press the Ready in button repeatedly
2.
until the required number of hours is
displayed in the display panel.
en
11