Measure And Add Detergent And Care Products - Siemens WM Series Instruction Manual And Installation Instructions

Operating the appliance
en
Make sure that no items of laundry
2.
are trapped between the washing
machine door and the rubber seal,
and close the door.
Measure and add detergent
and care products
Caution!
Damage to the appliance
Cleaning agents and agents for
pretreating laundry (e.g. stain removers,
prewash sprays, etc.) may cause
damage if they come into contact with
the surfaces of the washing machine.
Do not allow these agents to come into
contact with the surfaces of the washing
machine. If necessary, immediately wipe
away spray residue and other residues/
droplets with a damp cloth.
Measuring
Dose the detergents and care products
according to:
Water hardness. Ask your water
■
supply company.
The manufacturer's specifications on
■
the packaging.
The amount of laundry.
■
Soiling ~ Page 9.
■
Filling
:
Warning
Eye/skin irritation!
Detergent and care products may spray
out if the detergent drawer is opened
while the machine is in operation.
Open the drawer carefully.
14
Rinse eyes or skin thoroughly if they
come into contact with detergent/care
products.
If swallowed accidentally, seek medical
advice.
Dilute viscous fabric softener and
Note:
fabric conditioner with water; this
prevents blockages.
Pour the detergent and care products
into the appropriate compartments:
Measuring aid* A For liquid detergent
Compartment II Detergent for the main wash,
water softener, bleach, stain
remover
Compartment i Softener, starch,
do not exceed the maximum
Compartment I Detergent for prewash
Pull out the detergent drawer as far
1.
as possible.
Add detergent and/or care products.
2.
Close the detergent drawer.
3.
Measuring aid* for liquid detergent
*Depending on the model
Position the measuring aid for
measuring liquid detergent:
Pull out the detergent drawer. Press
1.
down the insert and fully remove the
drawer.
Slide the measuring aid forwards,
2.
fold it down and click it into place.