Sony PS4 CUH-1106A A20 Safety Manual page 12

2
Unplug the AC power cord, and then disconnect the
other cables from the system.
For safety reasons, remove the plug for AC power cord
from the electrical outlet, and then detach the other
cables.
3
Slide the HDD bay cover in the direction of the arrow
to remove it.
4
Remove the hard disk drive.
1 Remove the screw.
2 Pull on the hard disk drive to remove it.
12
5
Using a crosshead screwdriver, remove the screws
(four places).
Do not remove the rubber inserts from the screw holes.
6
Remove the mounting bracket from the hard disk
drive.
7
Place the replacement hard disk drive on the
mounting bracket for the PS4™ system's hard disk
drive, and then attach using the screws (four places).
Do not overtighten the screws.
8
Attach the hard disk drive to the system using the
screw.
Be sure to fully insert the hard disk drive in the HDD bay.
Hint
If you lose the HDD bay cover, screws, mounting bracket, or any
other parts, contact technical support for assistance (
cover).
back